top of page
Writer's pictureVert Arbusto

27 June 2021. How Do I Read The SR Reports Essay: Introduction; Observations; Reading The Reports



27 June 2021. How Do I Read The SR Reports Essay: Introduction; Observations; Reading The Reports

[0] Introduction

[1] Observations On Current Conditions at Tomsk;

[2] How To Read The Schumann Resonance Reports;

_

0.1 - Introduction

The purpose of this essay is to assist people who are interested in understanding the Schumann Resonances, as atmospheric phenomena, from the technical perspective.

Additional to the atmospherics, we are faced with the detecting hardware of the antennae complex.

Attached to the hardware of the detector-antenna itself, to the meters, graphs used to record these signals.

Eventually a conditioned signal gets plotted, to be analyzed on a RF Spectrogram.

0.1.1 - The Schumann resonances (SR) are a set of spectrum peaks in the extremely low frequency (ELF) portion of the Earth's electromagnetic field spectrum.

0.1.2 - Schumann Resonances are extremely subtle--operating in the pico- range. Specialize detecting-antennae equipment is necessary.

0.1.3 - Detector antenna complex needs to be placed in a remote location.

0.1.4 - Complex chain of processing is necessary to extract a valid signal from the atmosphere.

0.1.5 - The extracted signal must be conditioned, before it is properly recognizable by the spectrogram analyzer.

0.1.6 - There are multiple "moving parts" in this equation. The spectrogram is the last step in this process.

0.1.7 - SR are subtle energies of the atmosphere. Often times, these delicate atmospheric electromagnetics are over-powered by EM fields of unshielded domestic electronics.

0.2 - Atmospheric EM is not automatically SR

We are looking to explore the SR.

However, it's now a common occurrence to confuse SR with any and all atmospheric electromagnetics.

Most of which are actually much stronger in power and intensity.

We discuss what are the SR, in addition to what they may not also be.

Unshielded domestic electronics emit a RF signal much stronger than the SR.

This is more local to us, so we need to evaluate these as possible sources of "ringing" or physiological maladies.

0.3 - Keywords and phrases: Amplitude; Quality; Dependency; deci-Bel (unit of measure); Tesla (unit of measure); Mode (modulation); Bandwidth; Frequency; Velocity, Resonance; Harmonic; Vector; EMF (electro-magnetic field); nano- (prefix); pico-(prefix); Ionosphere (ionospheric layers); di-urnal variation;

_

1.0.0 _ Part One: OBSERVATIONS. Current conditions of Schumann resonances, as recorded on Tomsk's SOS graphs.

1.1.0 -Current Conditions.

Past 24 hours has been relatively calm. We had a day of flat-lined amplitude, which stayed stuck to the floor of the chart. Quality components have also been fairly smooth, and mild.

Sudden increase in Amplitude Modes around 03LT. Synchronous mode activity between Amplitude modes from 03-16LT. 03LT is 3 AM, Tomsk Time.

As stated previously, Tomsk SR 'daytime' ends approx. 23LT. The SOS detectors registered a series of bursts, at a time when it would otherwise be calm. Nighttime is when the sun is not directly beating-up the ionosphere into a taught state.

Twin peaks, amplitude spikes at 15LT, 16LT.

Under usual circumstances, Frequency will dip when amplitude spikes.

Frequency dependency is the measure of wavelength peak to peak, in kilometers. As Amplitude (the electric side, as measured in deci-Bels) spikes, the Frequency measurement dips down.

Normally, there is an inverse, or proportional relationship between Amplitude, and Quality (Electric and Magnetic components). Under normal circumstances, Amplitude, and Quality work together. In the case of the SR, where Amplitude is coming down from the ionosphere directly, the Modes of Amplitude will reflect a unified signal; which I call synchronous mode activity. This synchronous Mode between the 4 colors, is a relatively "pure" signal, or one of high quality.

As the Amplitude signal comes down from the ionosphere, propagating through the atmosphere, the purity of the signal is degrading in quality into magnetics.

[Below is reported the (so-called) "daily peaks". This term may be a little misleading. Not all the figures listed below are actual "peaks". The peak is peak amplitude reading; while some of these figures reflect an actual dip, or drop at the time specified.]


1.1.2 -Daily Peaks.

The following number values are the readings of the daily peaks, as reported by Tomsk SOS. (website link below.)

-Amplitude: A1(white)~78; A2(yellow)~59; A3(red)~51.2; A4(green)~43 (pico-electronVolt).

-Quality: Q1(white)~12.8; Q2(yellow)~8.9; Q3(red)~11.6; Q4(green)~11 (pico-Teslas).

-Frequency: F1(white)~7,95; F2(yellow)~13.86; Q3(red)~20.8; F4(green)~24.12[dip]. (given in Kilometers)


1.1.3 - Spectrogram:

Amplitude spikes come from lightning discharge; which travel in an upright fashion, as reflected on the spectrogram.

Quality is the magnetics, which radiate outwards, horizontally, as reflected on the spectrogram.

Green-mode-4 is the level, of wavelength frequencies which are closest in response to the actual planet themselves.

The other modes 1,2,3 measure reflectivity off the higher layers of the atmosphere.



1.1.4 - Things To Consider Relative To Amplitude Spikes, and The Schumann Resonance Harmonics:

The measurement of Schumann RESONANCE frequency is not that of a WAVE frequency.

Multiple waves interfering with themselves, create standing waves, hold steady at a resonant frequency; which is the difference between these two primary fundamental waves.

Harmonics are caused from two, or more waves being out of synchronization; which interfere with each other to create a resonance, harmonic frequency.

This resonant harmonic stays consistent over the course of time; due to certain constrains of the constants ( size and shape of the Earth, of the ionosphere; of the speed of light, and radio frequency waves, etc.)


1.1.5 - Amplitude spikes are not resonances, nor are they harmonics, nor are they measured in Hertz, which is cycles per second.

Amplitude (the electrical component) comes top-down, from the ionosphere (at around 200,000 Volts) to the Earth ground.

Amplitude is top-down, meaning it does not "rise" to a frequency. Amplitude does not "reach" up to a frequency. Amplitude lowers down to a reported deci-Bel power rating, which is pico-electronVolt deci-Bels of amplitude.

Amplitude spikes are not resonances, nor are these harmonic frequencies.

Amplitude spikes are jolts of electricity, which come top-down from a much higher voltage than that which is reported by the antenna detector complex.


1.2 __ Some Words On Frequency.

Frequency is a term with broad, often confusing usage. For our purposes, we'll define this term.

1.2.1 - Frequency, technically-speaking, is used to designate peak events over time. This is also cycles per second, such as a wave, propagating along a horizontal fashion.

1.2.2 - Amplitude is vertical frequency, or Intensity, measured as deciBels of electron-Volts. Spikes relative to the spectrogram are scaled vectors, based upon the limitations of the scope itself.

1.2.3 - Velocity is speed, straight-line vector travel over time.

1.2.4 - Resonant frequency is the difference between two fundamental, or originating waves, called “wavefronts”. These fundamentals run into each other repeatedly. This causes interference patterns, called “standing waves”. Standing waves are quasi-stationary; they oscillate in place in the atmosphere.

1.2.5 - Harmonics are a series of resonances, which are splitting-off from the original primary resonance into a harmonic set of evenly-spaced resonant frequency variants; in this case its “differential frequency”, or the separation between the resonant harmonics is 6.6 Hz. Again, this is a differential in the series, of one harmonic from another.

1.2.6 - Frequency, as given in the standard measurement of radio waves is the distance in kilometers, over time. The number values given in the dependence from Tomsk is a measure of kilometers; this is not the resonant frequency.

1.2.7 - Frequency of the electric scale of a person is separated by 10 Hz. Each of your primary energy center portals ('the chakras') operates in 10 Hz differentials.

1.2.8 - Frequency as periodicity, of heart rate function; synchronization of body centers with states of brain activity: called “coherence.”

1.2.9 - Sympathetic vibrations is the best way of looking at this phenomena; essentially it's where one base resonance was moved to meet another, stronger base resonance


1.3.0 _ Myths Of The Schumann Resonances

[Tomsk's] Spectrogram is NOT "The Schumann"; Comparing 'The Schumann' to the spectrogram.

1.3.1 - What is "The Schumann" ?

1.3.2 - Short answer: Who knows ?!

1.3.3 - Longer Answer: Although this phrase is too commonly-used in the "Earth's-rising-vibrations"-based belief system of 'Ascensionism'; exists there does not such thing as "The Schumann."

This phrase is not found in Webster's dictionary. Nor is it found in Oxford's Dictionary Of English. This is not a phrase found in any scientific literature. One can not go to a clearing house of research and enter the phrase into a search engine, to return valid results. There simply exists no standard, technical definition of the phrase "The Schumann."

Yet, with the human condition, language underwrites all thoughts of the human. A definition or meaning is necessary to continue in the learning process.

There is a degree of fuckery inherent in the language, that allows for a wiggle factor, to conceal the innate meaning of a thought-form that is not well-developed; or a thought-form that is not grounded in an actual reality.

In other words, the language allows for a built-in distortion, or concealment of truth, behind personal perceptions.


1.4 - What is the problem with referencing the spectrogram as "The Schumann" ?

Primary Issue: "The Schumann" is pseudo-science, not rooted in scientific principles, or actual fact; while misrepresenting itself as legitimate science.

Part of "The Schumann" problem is one's innate understanding of a concept. Behind each phrase is a thought-form clear in one's mind: what clear picture does a person have in their head, associated with "The Schumann" ?

Part of "The Schumann" problem rests in the inability of the vocabulary itself not being able to convey the proper meaning. SR is radio, and invisible to the unaided eye; as such, a visual aid is necessary. Yet, in 'The Schumann', what are the colors actually attached to?

Part of "The Schumann" problem is the fact that the word inherently is meaningless technically-speaking. It is one thing which has been misappropriated to represent something else, completely different. Due to the inherent fuckery of the phrase being introduced AS a means of confusion, continued use of the phrase is a continued walk along a pathway of confusion.

Part of the "The Schumann" problem is that belief itself has a power. Belief is fueled by the rhetoric we choose. How well do we know our own viewpoint, or the tenets of our belief? How often does additional facts, or data challenge our cherished beliefs?

Part of this issue is that beliefs don't need facts to be valid. Beliefs are not where facts go to become law. Yet, it seems important to bolster our deeply-held beliefs (which are invisible, unknowable) with actual facts, and objective validation.

It's simply my opinion that one should ideally come to understand SR simply for the fact of understanding the world in which we exist. Ascension is not based on an ability to understand SR. Ascension, as one has crafted the concept in the head is fine; without understanding the actual technical protocols of measuring SR.

However, if one feels the need to invoke the power and images of science for one's belief and mental well-being; then one needs to know what s/he is expousing. If one says that science is supporting their beliefs, then the science needs to be correct. You can not misappropriate the actual science and technology being used successfully elsewhere, for some alleged higher dimensional ideological crusade; at least, not without undesirable consequences attached to the deception.

Part of this issue is that the spectrogram is not a sensor device that measures anything. The Schumannists feel that their version of 'the schumann' [meaning spectrogram] is a receiver plugged directly into the atmosphere, without any signal processing, filtering, nor condition, nor is there a chain of electronic components in the process of plotting the image posted on Tomsk's servers, for public inspection.

Part of this issue is the assumed censorship when things go unexplainably wrong, or malfunction. They use an otherwise unexplained image to explain something which would not otherwise be able to be shown, nor visualized. Replacing a manufactured narrative for an outright fabrication.

Hard to believe, but there are more particulars to this list of issues; yet, this will suffice for is essay. Planck has been established.


1.5 - What is the measure of "hocus pocus" in your Belief ?

The phrase 'hocus pocus' is the root of the phrase "hoax". The phrase originates in the day's of a court jester, jugglers who would utter faux Latin phrases to give the air of casting an actual spell, during illusion ritual for the entertainment of the King. It's part of the casting of enchantments, used in beguiling an unsuspecting Royalty.

Intrinsically, there is no scientific, technical, nor established meaning behind the phrase "The Schumann". As technical descriptor, it is useless.

Among other reasons, a primary problem is the uncertainty what the parameters are to this phrase. It is simply your inferred understanding of the phrase 'The Schumann', that allows it to have significance.

Yet...what does "The Schumann" actually mean?

Phrase "The Schumann" is at this point, what amounts to religious ideology associated with the Religion of Schumannism, or the Cult of Ascensionism, perhaps.

The degree of religious devotion that people pay mind to--in their daily pilgrimage to the website to gather the "The Schumann" data for the day--might be considered to be a scrupulous religious practice.

That there is no standard definition behind "The Schumann" is what allows wonky ideology to be introduced into the discussion, as legitimate data.

Yet, this phrase appears all over the pages and videos of those who are looking to cash-in on their scrying of 'the schumann' glyph.

"The Schumann" is used as a tool for "technological scrying": reading a meter, based on intuition and wishful-thinking.

Essentially, the main difference between 'The Schumann' and the spectrogram is the inclusion of supporting data; Or, how the visual representation gets transliterated (whether it is read, or interpreted like modern art.)

It's my understanding the "The Schumann" gets channelled;

In order to know the difference between 'the schumann' and the SR spectrogram, it's super important to know what a spectrogram technically does. From there, we might apply this to the application of Tomsk, and SR in general.


1.6 - Gaia's heartbeat.

Tomsk's Schumann Spectrogram is not reading Gaia's heartbeat of 7.8 Hertz. The spectrogram is an analyzer of an electric signal, which is captured from the antenna complex.

There is another circuit entirely that conducts power through the planet herself. This is the 'lower DC circuit' of the telluric grid of the geoelectric circuit. The heartbeat of the planet resides within the chest of the planet herself.

The Schumann spectrogram is specialized equipment, with a very limited range of applicability. There is a huge misunderstanding on the matter of what is being displayed on the spectrogram:

The spectrogram is not a seismic meter. Its not an optical light sensor. It is not measuring telluric currents; nor is it recognizing UV-series light; nor does the spectrogram detect Gamma bursts; nor does it detect X-rays.

The Schumann resonances are the product of lightning discharges between the upper DC - lower DC circuits; which continue to propagate as magnetic waves; which circle the globe; eventually oscillating in place to create the atmospheric resonances.

Information outside of the pre-set signal range gets filtered-out as 'noise'. Local interferences can impart a false signal on sensitive detectors. Active filtering is used to avoid a false local signal imparted upon the plotted images.

The "heartbeat" of the planet rests within the "chest" of the planet herself. This circuit is embedded within the planet herself; does not "leech-out" into the atmosphere, as people believe it does. Earth's planetary electric grid is a much more powerful circuit than the Schumann resonances themselves.

Current is the magnetic-side of the EMF signal. Travels "electrically" as a direction such as North-South/East-West, in the nano-Tesla range.


2.0 __Part Two: How To Read Schumann Resonance Reports From Tomsk (Tomsk State University/Space Observing System); in clear, concise terms.

2.1 __ Collecting & Processing Data

- The Antenna complex

On the subject of the receiving antennas for the data, we need to understand a few basic concepts on how the signals are measured.

Atmospheric electromagnetics propagate (move) through the atmosphere as follows:

Amplitude [Electric portion of the signal] propagates vertically (as a theoretical 'column') ; As a visual aid, I like to explain it moves like a flagpole, from top down into the Ground to be discharged in Earth's circuit. A di-pole wire [Marconi-type] is commonly used for this portion.

Quality [magnetic-side of the signal] propagates horizontally (laterally)--in a manner described as "hugging the ground" ; As a visual aid, I like to give the analogy of a see-saw on the playground, our theoretical fulcrum would be our theoretical flagpole, grounding into the grid. A pair of induction coils is used for detecting this portion.


2.2.0 _ The signal.

2.2.1 - Amplitude/ Electrics

An atmospheric electromagnetic impulse that reaches the antennae hardware (the actual wire itself--which is sufficient enough to overcome the impedence) generates a signal. This initiates electron movement along our wire.

This electron propagation along the wire, is what gets processed through the amplification-filtering chain. An amplified, processed signal is fed into the spectrogram eventually.

This action of electron propagation along the wire ultimately produces a "report." The dependency report is a line graph showing the processed signal, in a line graph form.

There is a dipole-type antenna which measures [Amplitude] the electrics; reading in deci-Bels of pico-electron-Volts. The actual strength of the signal itself is not powerful enough to feed into the spectrogram, due to a constraint of the line level input strength of the arriving signal.


2.2.2 - Quality/ Magnetics

Induction coils serve as the magnetic-side [Quality] detectors; readings in pico-Teslas. Quality [the magnetic portion of the signal] travels horizontally, or "hugging the ground", laterally from the source, which is the electric-side.

Induction coils are usually wrapped in protective enclosures of "plexi-glass" or other clear plastic. Generally, these are placed close to the ground, perhaps 6" off ground.

The heart of the SR detecting antennae is the induction coil. This is copper wire wrapped around a magnetically permeable material ("MuMetal").

The coil senses a EMF signal which is within a range of receptivity. The winding material itself, (oxygen-free copper wire) has an internal impedence. This impedance will otherwise prevent a signal from being detected, if the signal is not amplified.

For finer signals like Schumann resonances, finer diameters of wire are required. Incoming signals need to overcome the natural reluctance (impedence) of the wire in order for a signal to be generated along the length of the detector coil.


2.2.3 - What is signal conditioning ?

From the antenna detecting harware a line signal is fairly weak, so it needs to get amplified to a usable voltage.

From this, a filtering chain is used to remove unwanted noise from the system. Such noise may be a 50Hz peak in the surrounding environment from domestic power mains.

A direct signal is not possible to be fed directly into a spectrogram. There is a line-level impedance issue in the first place that needs to be rectified. The input microvoltage coming from the antenna hardware is not up to a usable line-level strength, so an amplifier needs to increase the signal strength fed to the spectrogram.

There is also a point of data storage on harddrive, which requires a cpu proccessing algorithm to track, maintain the data, alongside of the dependencies being detected.

2.2.4 - Plotting the Spectrogram

The information plotted on the spectrogram is: the dependency of the dipole antennae; the dependency of (usually 2) induction coils: one for N-S; one for E-W; the dependency of the frequency, which is the distance from peak to peak, in kilometers.

Each of these dependencies has 4 potential colors that might appear on the spectro-, based on the mode, or 'slope' (shape) detected by the hardware itself.

The spectrograph is plotting a 3 dimensional, spherical signal, on a planar surface; based upon the information received from the reporting dependencies. The signal data reporting by dependencies is the 'mode color information'. The mode color information is what gets fed into the spectrographic plotter; therefore creating the interesting set of patterns found on the finished plotting.


2.2.5 - EXTREMELY IMPORTANT!

Spectrogram is not directly plugged-into the atmosphere; nor is it a meter reading, nor is it a sensor, nor is it a detector; nor is it an antennae.

The spectrograph is not reporting the actual (raw) data, as many people feel that it does.

The spectrograph plots its images based upon the conditioned data coming-from the hardware itself.

Line graphs produced from the processing of the conditioned raw data = "Dependency".

The spectrogram is a useful tool for visualization. Yet, it is important to remember that this image is a composite view, providing a convenient three-dimensional image.

The plotted images of the spectrogram are scaled in resolution to fit the constraints of the actual scope screen.


2.5.0 - The SR Spectrogram

2.5.1-Spectrogram analyzes data.

Analyze means evaluate. Or, as is our case, to break-up, or disperse the incoming signal of the dependencies.

"A spectrogram is a visual representation of the spectrum of frequencies of a signal as it varies with time. When applied to an audio signal, spectrograms are sometimes called sonographs, voiceprints, or voicegrams. When the data are represented in a 3D plot they may be called waterfalls." (https://en.wikipedia.org/wiki/Spectrogram)

It does not collect, nor measure, nor detect any information. Antenna hardware does the actual detecting of the physical environment.

Antennae wire collects, or detects the actual environmental data, converting it into an electrical signal, processed through an amplification/filtering chain.

These environmental signals become processed through the amp & filtering chain. The amplification and filtering create a conditioned signal, which eventually becomes intelligible to the spectrogram.

Conceptually-speaking spectrogram is a printer, which breaks-up a spectrum of light into constituent elements, based on dimensional ("slope") models, pre-set into the processing algorithm.

At no point is a spectrogram detecting, nor collecting data. This bit of machinery only ANALYSES data from an external (processing) source. [Common misunderstanding of The Schumannist's is the belief that the spectrogram receives the actual data from the atmosphere.]

The Spectrogram is a composite, plotted in colour, based upon the information from the reporting dependencies. This is one of the differences between "the Schumann", and the spectrogram. The spectrogram is plotting an actual signal, which comes from the antennae-detector

Schumann resonances are global electromagnetic resonances, generated by lightning discharges in the cavity between the Earth's surface and the ionosphere.

The cavity between the ionosphere and Earth ground is called a "waveguide." Schumann resonances bounce-off the Earth's surface; they are not generated FROM the Earth's interior. Lightning discharges are similar to striking a bell, which continues ringing.

This atmospheric resonance "hum" is that which is recognized by the antennae; therefore is that which is recorded on the spectrogram: subtle atmospheric resonances of the pico-range.

Spectrograph machines, in general, break-down a range of signals into constituent frequencies, or portions of the overall signal. With any spectrogram it's important to get the information of the dependencies. This is the signal after it has been filtered and conditioned; or, essentially, the raw data. .

For the sake of illustration, these graphs are reproducing a phenomena which is otherwise invisible. A little artistic license may be necessary, to decrypt the proper information appearing on the spectrogram.


2.5.2 - "Format:

" A common format is a graph with two geometric dimensions: one axis represents time, and the other axis represents frequency;

" a third dimension indicating the amplitude of a particular frequency at a particular time is represented by the intensity or color of each point in the image.

" There are many variations of format: sometimes the vertical and horizontal axes are switched, so time runs up and down; sometimes as a waterfall plot where the amplitude is represented by height of a 3D surface instead of color or intensity.

" The frequency and amplitude axes can be either linear or logarithmic, depending on what the graph is being used for. Audio would usually be represented with a logarithmic amplitude axis (probably in decibels, or dB), and frequency would be linear to emphasize harmonic relationships, or logarithmic to emphasize musical, tonal relationships. "

( https://en.wikipedia.org/wiki/Spectrogram)


2.5.3 - [ Basic introductions to spectrogram:

(https://youtu.be/_FatxGN3vAM);

(https://youtu.be/YZTTmNYr6jA);

(https://youtu.be/OI3pIvLhVcc) ]


2.6.0 - Orientation.

On the left side of the graph is the resonance frequency, which starts at 0 in the top left corner. From there moving downwards, the numbers increase.

Running along the bottom of the graph is the measurement of Time. There are two sets of clocks. Immediately below the graph is a string of white numbers, which is Tomsk Local Time.

The larger yellow numbers (provided by Disclosure_news) below these are time in UTC.

[ UTC originates in Greenwich, England; stands for Universal Time Co-ordinated. (Tomsk is UTC+17; East coast US is UTC-5).]

The Spectrogram coloring is plotted from the reporting 12 dependencies, of Amplitude (Modes 1-4) ; Quality (Modes 1-4) ; Frequency (Modes 1-4);

"At rest, fair weather state" (theoretical 'zero state') is Dark Blue. Dark blue is our "canvas."


2.7.0 __ Earth's Geo-Electric power grid.

2.7.1 - Earth: A Battery

It is well-advised to consider the planetary sphere as a type of battery. Three main components of the "Earth battery" are: the Upper DC circuit; AC circuit; Lower DC circuit.

2.7.2 - "DC" is direct current; or moving in a straight line. "AC" is alternating current; or moving in a wave formation.

2.7.3 - Upper DC Circuit. This is Basically the IMF (Inter-planetary magnetic field) which links Earth to the Sun. This is the magnetosphere, and ionosphere together. The Upper DC circuit acts as a capacitor to hold a high voltage charge in the upper atmosphere. The amount of charge held here is between 200K-250K Volts.

2.7.4 - AC Circuit. This is the area between the upper DC circuit, and the Earth Ground of the planet herself. This is also referred-to as the "waveguide" in which the SR activates. Energy range of this circuit is pico-electro-Volt, and pico-Tesla.

2.7.5 - Lower DC Circuit. This is the Earth ground of the planet herself. The first primary layer of conduction is through the telluric currents. The water and soil of the planet conducts a current, which is the magnetic side of power, moving laterally through the planet herself. This is measured in nano-Teslas

2.7.6 - Insulator, or Electric "choke". Under normal conditions, the lower atmosphere is generally a fine-enough insulator between these two poles of the planetary battery; which are both measured in the nano-Tesla range of the spectrum.

2.7.8 - Battery poles. The upper DC circuit is one pole of the battery. The lower DC circuit is the other pole of the battery. SR come from the discharge between one pole to the other. Usually, it's the Upper DC to the Lower; yet, the flow might move in the opposite direction, from Earth to ionosphere.

2.8.0 __ The Twelve Dependencies 4 Modes Of Reception.

2.8.1 - What is the SR "Mode" ?

The Short answer is that the Mode gives one the coloring information plotted on the spectrogram.

Modeis a correlation, or comparison between the Electric and magnetic components to the EMF within measurable range of the antennae. Because electricity and magnetism move as a "requited pair"; there should always be an inverse relationship between Amplitude and Quality.

Amplitude refers to the height of the signal, which is the coherent vector [velocity] of voltage (electron-Volts)

Each antenna complex reports four modes of Amplitude, Quality, Frequency. The antenna complex is recording a 3 dimensional configuration, based-up the signals received of the dependencies of the measuring hardware, after its been filtered and processed.

This is set-upon the base which measures the magnetics, or Quality, along two separate axes, 90 degrees apart; these are aligned North-South / East-West.

A Mode is a presumed shape of the SR (electromagnetic)wave. Mode is a mathematical description of the size and geometry of a wave of a theoretical model within the processing of the incoming signal; within a pre-measured SR spectrum (0.3-40Hz for Tomsk).

[Modes explained: (https://youtu.be/tQT0kZo_QDM)(https://youtu.be/zHHk6WUJUK0) ]


2.9.0 _ Modes = color info

Modes are what provide the coloring on the spectrogram plottage, depending on the parameters of the reporting hardware.

Modes are inversely related between the height of Amplitude, and the width of magnetics; which translates to the direction that a color moves, in addition to the size and shape of the "brush" used to color the spectrogram

White is Mode 1. This correlates to the highest layer of the ionosphere, furthest away from the planet; where the purest voltage is held intact.

White Amplitude is the tallest signal, highest in voltage. Narrowest in Magnetics.

Yellow is Mode 2, which measures a lower frequency range, or bandwidth, than the White Mode.

Red is Mode 3, which measures successively lower range of bandwidth than Yellow.

Green is Mode 4, the lowest frequency, largest in wavelength, between 10-100,000 Km in wavelength sizes. This equates to the green "brush" being the fattest, and widest tool to plot on the spectro-

___

Thank you for reading. Hoping your day is Blessed.

_

schumann-resonances weblink shareable: (

Schumann-Resonance-Harmonics Youtube channel link of the video : (





21 views0 comments

Recent Posts

See All

Commentaires


Telluric Currents

22Feb2021_website-logo.png
bottom of page