12 March 2021. How To Read The Schumann resonance Spectrograph; based on standard engineering

12 March 2021. How To Read The Schumann resonance Spectrograph; based on standard engineering and technical perspective.

How does Grounding fit into this?

** **

Orientation Of, And Introduction To Schumann's Spectrogram;

We start with an overview. On the left side of the graph is the resonance frequency, which starts at 0 in the top left corner. From there moving downwards, the numbers increase.

Running along the bottom of the graph is the measurement of Time. There are two sets of clocks. The larger, bottom numbers are UTC. Above this is local time.

The Spectrograph is plotted from the reporting 12 dependencies, of Amplitude (Modes 1-4) ; Quality (Modes 1-4) ; Frequency (Modes 1-4); upon the Dark Blue coloured "canvas."

Dark blue would be our theoretical "at rest state." (Which we theoretically return back to. It might be considered like an "elastic", or a medium which is under a certain tension, therefore always in motion to or from that dark blue background "at rest", or balance point.) Upon this the twelve dependencies use actual light to plot a tapestry of patterns and codes. Because the atmosphere, which includes all the way out into the magnetosphere, is elastic in this sense, this is what essentially creates this "weaving" pattern of sheparding these EM waves around the "waveguide" of the Earth-Ionosphere 'corridor.'

At rest state of "fair weather", is our theoretical "zero point"; which starts as a dark blue (Navy)-coloured background, which is as above-stated an interactive canvas. Upon this canvas gets reported with, or plotted by the information of the dependencies. This is the actual raw data which is graphed by the line graphs of 4 individual colours. I am referring to these 4 colours, which correspond to the 4 modes, as our pallet of "primary colours." (Technically, White is not a colour, but blue is. We essentially have 4 colours as our primary pallet.)

When the literature refers to Modes, this relates to the type of internal copper windings (based upon the number of turns, of the size and cross section of wire, etc.), which allow for a certain known range of signals to be detected. This band of signalsis in the lowest end of low frequency radio waves, which encircle the globe; primarily due to lightning discharges.

*

4 Modes Of Reception.

A Mode is essentially a "band", or bandwidth of measurement, within the EMF spectrum. ELF is broken-up into 4 segments, or modes. What Is The ELF portion of the spectrum?

"Schumann resonances are the principal background in the part of the electromagnetic spectrum[2] from 3 Hz through 60 Hz,[3] and appear as distinct peaks at extremely low frequencies (ELF) around 7.83 Hz (fundamental),[4] 14.3, 20.8, 27.3 and 33.8 Hz.[5]

"Extremely low frequency (ELF) is the ITU designation[1] for electromagnetic radiation (radio waves) with frequencies from 3 to 30 Hz, and corresponding wavelengths of 100,000 to 10,000 kilometers, respectively.[2][3]

"ELF radio waves are generated by lightning and natural disturbances in Earth's magnetic field, so they are a subject of research by atmospheric scientists. In atmospheric science, an alternative definition is usually given, from 3 Hz to 3 kHz.[4][5]

(--Wikipedia.org)

*

The Twelve Dependencies

This next section explaining the use of the Modes is difficult without numbers and specific technical data. It's necessary, yet these specifics are not the immediate concerm of this basic summary. To balance the need for some technical/specific data with overall readability for someone without math skills, is necessary to understand the basic function of the Modes.

We see the Modes as bandwidths, separations (similar to octaves) of the entire spectrum. In otherwords, it is the means of breaking-down the entire spectrum of EMF waves, which span a wide range of ELF radio waves

White is Mode 1. This correlates to the highest layer of the ionosphere, furthest away from the planet. Highest frequency, of the low-range energy where the resonances reside.

Yellow is Mode 2, which measures a lower frequency range, or bandwith, than the White Mode.

Red is Mode 3, which measures successively lower range of bandwith than Yellow.

Green is Mode 4, the lowest frequency, but largest in wavelength, between 10-100,000 Km in wavelength sizes.

*

Plotting The Spectrograph

Due to the abilities of the antennae to pick-up only certain signals, these colours are going to also appear in certain recognizable patterns, based-upon the type of signal; whether it is more electric, or more magnetic. For example, the bright green shows up largely as bands, due to the fact that it is exhibiting the characteristics of the magnetic waves.

Depending on where and how the EMF signal interacts with the antennae, this is the type of mark which is going to be plotted on the spectrograph, effectively.

In other words, white, and yellow frequently, appear as spikes, or vertical lines, due to the high content of electric charge, and the fact that this is how the antennae pick-up Amplitude/charge/electrics. White and Yellow Modes are more heavy in electric content.

Red and Green modes measure the layers closer to Earth. Green Measures the layer of emf waves which occupy the space between Earth and the lowest layer of the ionosphere. Ultimately, the ilonosphere acts as a filter of sorts, which forces the bouncing, or return characteristics of the wavious wavelengths are.

Because the Green is high in magnetic content, the green-based colours are going to be magnetic, and display horizontally, to reflect the orientation of the reporting dependencies, Quality. We see an "upright", or vertical signal in Quality in the line graph, but the full color spectrograph shows it much better, the orientation of the magnetics, basically as "flat."

The colours teal, aqua, turquois, "indiglow" are not actually in the "Green family", dispite what your colour theory may tell you. They are...but not really. These are a product of the interaction with the background of Modes 1, and 2, the white and yellow.

White and yellow is top going down, as it were, into the otherwise calm background state of rest of the Dark Blue.

Going upwards from rest into the bottom of the modes, due to heavy magnetics, the colouration goes from dark blue into Green. This is how we know that the bright teal and turquoise is a signal moving from top (high charge), downwards into the "at rest state."

Red and Yellow make orange, pumpkin, rust,; when mixed with white we get coral, or pink. These indicate a mid-grade electronics, fairly balanced with magnetics. This is why orange and rust colours seem to "float in the air" of the chart, because it is actually "floating" somewhat.

* **

09 March 2021. What is the purpose of Grounding, relative to the Schumann Resonances?

In the "Popular topics" section, there is a tag marked "Grounding", with posts discussing the subject of grounding, and why this is important.

The following is a link to one of the yt channels i subscribe to, who I get alot from her message. It's a recent vid that came up on my suggested feed. I got alot from it, and it fits nicely into our discussions.

Link: ["Connect with Earth- How to Ground and Stabilize Your Frequency" (https://youtu.be/r9Bx5UcG088) ]

SR are atmospheric electromagnetics; meaning this is electricity & magnetism hold within the atmosphere, that is "stationed" around the globe, as layers of electro-megneto-gravity, which blankets the earth. Electricity converts to magnetism, which eventually gets bound as resonant harmonics, which kinda "hum" in place, as a type of gravity.

This is resident electricty and magnetism in the air around you, that is looking for a chance to ground itself into the planet. You, potentially are one of these conductors, if you so choose to be.

The Schumann resonances are not causing your ringing ears, nor the vertigo, nor the frontal headaches, especially not your nausea, nor the anxiety. These are coming as a result of the person not properly grounding him/herself into the Earth Ground.

Schumann resonances are electromagnetics, in the atmosphere, which normally occur, and have been there likely since the beginning. As solar activity which is somewhat stronger electromagnetically than the Schumann resonances, (measured in nano-Tesla) kicks-into gear; regardless of what a mechanically reproduced chart tells you, these so-called symptoms, need to be electrically grounded into the Earth Ground.

This is the ONLY way to successfully deal with the persistent ringing, and vertigo, etc. It is your distance away from the sacred spirit of the planet, GAIA, that has your ears, and crystals humming in sympathetic vibrations of the atmospheric electronics.

Earth ground is telluric currents of the planet. These telluric currents are the actual heartbeat function of the planet. Schumann resonances happen in the "waveguide" of the atmosphere of the planet.

**

Schumann Resonances Website blog link: (https://schumannresonances.wixsite.com/website/post/09-march-2021-what-is-the-purpose-of-grounding-relative-to-the-schumann-resonances)

Wordpress link: (https://vertearbustosschumannresonanceharmonics.wordpress.com/2021/03/09/09-march-2021-what-is-the-purpose-of-grounding-relative-to-the-schumann-resonances/)

Patreon: (https://www.patreon.com/posts/48563894)

-